User's Manual
Airstream 4001 F49-MRT User Guide
Page 33 Commercial in Confidence UWB-D00211 Rev B
To add a new channel:
1. Click Add Row - to add new Channel row. Id. Number will be added automatically in
ascending order.
2. Enter Frequency
3. Enter Bandwidth
4. Click Reset to discard any changes
Or
Click Submit to save the changes.
5. Click Save and Apply to apply changes immediately
To delete a channel:
1. Check Sel - to select the Channel row to delete
2. Click Delete Row to remove a channel from the list
After Bandwidth range changes, reboot the system in order for the new configurations to take
effect.
13.2 Authentication
The Authentication settings page of the Airstream 4001 F49-MRT management allows you to
enable and define a method of authentication, mechanism and manage the certificates of the unit.
Additionally you can select one of five key encoding methods listed in “Phase 2”. Identity,
username, and password should be entered with respect to the BS, if authentication is required.
Note: PEM (Privacy Enhanced Mail, Base64 encoded DER certificate) is the
only certificate format supported.
To set Authentication:
1. Click on WiMAX to open the drop down list and choose the Authentication sub-option.
Figure16‐WiMAX‐Authentication
13.2.1 Authentication Status
Enable and define Authentication type.
Note: TTLS = EAP-TTLS and TLS = EAP-TLS