User's Manual
Airstream 4001 F49-MRT User Guide
Page 24 Commercial in Confidence UWB-D00211 Rev B
11 Status
The Status page is used for viewing system status information (read-only) related to the CPE and
its related parameters and connections.
To return to the Status page at any time click the Status button.
To access the Status page:
1. Click Status to navigate to the Status page.
2. Click the desired sub-option on the drop down list.
11.1 WiMAX Status
To view WiMAX status related parameters on the Status page:
1. Click on Status to open the drop down list and choose the WiMAX Status sub-option.
Figure7‐WiMAXStatus
The parameters displayed (read-only) on the WiMAX Status page are described in the table
below:
Table8‐WiMAXStatuswithSFdisplayed
Parameter Description
WiMAX Status
System Status
Displays System status information
Frequency Displays the current frequency being used. While scanning the
frequency display will fluctuate until frequency is located
Bandwidth Displays the bandwidth used
BSID Displays the Base Station ID
State Displays the current state of the CPE
Physical Status
Displays Physical status information
RSSI Displays the RSSI (Received Signal Strength Indicator) value
CINR Displays the CINR (Carrier to Interference Noise Ratio) value
CINR 1 Displays the CINR (Carrier to Interference Noise Ratio) value
for reuse1 zone