User's Manual

Airstream 4001 F49-MRT User Guide 

Page 21 Commercial in Confidence UWB-D00211 Rev B
10 Initial Procedure for Web-Based Management
This chapter contains information on the Web-based Graphical User Interface (GUI). The GUI
enables quick and simple setup, and discusses the following topics:
¾ Browser Requirements
¾ Configure and Connect
¾ Accessing the MRTe via the Web
10.1 Browser Requirements
Ensure that your Web browser with which you want to access the Airstream 4001 F49-MRT is
running Microsoft Internet Explorer 8, Firefox 3.0 and above.
This section describes the initial procedure for Airstream 4001 F49-MRT operation and how to
initially connect the MRTe to the base station.
10.2 System Configuration and Login
This chapter describes how to configure the CPE and to connect it to the base station.
User computer can get IP address automatically from CPE. The CPE’s default login values are
listed below:
¾ HTTP CPE address:
• 10.1.1.1 (subnet 255.255.255.0)
¾ User name: "root"
¾ Password: "admin"
Note: The following screens shots are for illustration purposes only.
10.2.1 Accessing the Airstream 4001 F49-MRT
Proceed with login and connect to the Airstream 4001 F49-MRT.
To access the Airstream 4001 F49-MRT Web server:
1. Start your web browser (e.g. Microsoft Internet Explorer).
2. In the Address Bar field, enter the IP address of the Airstream 4001 F49-MRT (i.e. 10.1.1.1)
subnet (255.255.255.0).
Note: To quickly enter the Airstream 4001 F49-MRT server address, you can
simply type the IP address without typing "http://". When you press <Enter>
(see Step 3), the full address (i.e. "http://...") is automatically entered.
3. Press <Enter> on your keyboard.
The Login page of the Airstream 4001 F49-MRT web-based management opens, as displayed
below: