User's Manual

Airstream 4001 F49-MRT User Guide 

Page 20 Commercial in Confidence UWB-D00211 Rev B
9 Connecting to Power
The MRTe is powered from the 12/24 VDC power cable that is connected to the vehicle’s power
source.
The input power for the MRTe is 10-30 VDC.
Caution: Before powering on the MRTe, ensure that some type of equipment
such as anantenna or an RF attenuator is connected to the RF jacks. This
eliminates the risk of irreversibly damaging the MRTe.
Caution: Connect the 12/24VDC power cable to the power source only after
the all connections are fully assembled.
