User's Manual

Airstream 4001 F49-MRT User Guide 

Page 18 Commercial in Confidence UWB-D00211 Rev B
7 Mounting
This section describes the mounting procedures for the MRTe.
7.1 Mounting the MRTe
Caution: Mount the MRTe in an orientation such that its port panel is
accessible after mounting. This facilitates easy cable connection and
disconnection.
The MRTe provides mounting holes for attachment, as displayed in the figure below.
Figure4‐Mountingtemplate
Align the MRTe's four holes with the cabinet bracket holes, and then insert a screw (not supplied)
through the holes, slide on a washer spring washer and nut and then tighten.
Note: Airspan does not provide screws for attaching the MRTe. The screw
size depends on the cabinet structure or surface to which the MRTe is to be
attached.
Recommend screw type required:
• Size: M6
• Length: 65mm minimum, (Depending on assembly conditions)
• Head: Pan Phillips head.
• Recommended material: SST