User's Manual

Airstream 4001 F49-MRT User Guide 

Page 14 Commercial in Confidence UWB-D00211 Rev B
3 Installation Prerequisites
Before installing your MRTe, read the following to ensure that:
¾ No items are missing from the package
3.1 Package Contents
Examine the Airspan WiMAX MRTe shipping container. If you notice any damage, or missing
items as listed in the Packing List, immediately notify the carrier that delivered the unit and
contact an Airspan representative.
The MRTe kit should contain the following items:
¾ MRTe device
¾ Power cable
¾ Glands wrench
¾ Spare Fuse
Note: Antennas ordered separately. Contact supplier.
Note: Airspan does not provide screws, washer or nuts for mounting the
MRTe. The screw size depends on the structure of the cabinetry to which the
MRTe is to be attached. When selecting screw sizes, consideration must be
given to the weight and size of the MRTe and typical vibration conditions.
Table2‐PackageContents
Name Quantity Comments Image
MRTe 1
External Power
Cable
(PN: 687-00-050)
1
Terminated on MRTe power
connection with 2-pin screw-
down connector and Power
source side with 2 x #10 closed
end ring connectors.
White = (+)
Black = (-)
Glands Wrench 1 Tool for tightening the Glands.
Spare Fuse 1 Extra 6.3 A fuse.
Note: Additional parts are required e.g. antennas, RF cable all available from
Airspan. Please contact your supplier for additional information.