Airstream 4001 F49-MRT User Guide
Airstream 4001 F49-MRT User Guide Acknowledgements Airspan Networks Inc acknowledges the following trademarks used within this document: © Microsoft Corporation http://www.microsoft.com Copyright © Copyright by Airspan Networks Inc., 2013. All rights reserved worldwide. The information contained within this document is proprietary and is subject to all relevant copyright, patent and other laws protecting intellectual property, as well as any specific agreements protecting Airspan Networks Inc.
Airstream 4001 F49-MRT User Guide Table of Contents Acknowledgements .......................................................................................................................... 2 Copyright .......................................................................................................................................... 2 Safety Notices...................................................................................................................................
Airstream 4001 F49-MRT User Guide 6 Connecting WiMAX and WiFi Antennas .................................................................................. 17 7 Mounting .................................................................................................................................. 18 7.1 Mounting the MRTe ............................................................................................................... 18 8 Network Cabling ..................................................
Airstream 4001 F49-MRT User Guide 17.1 Glossary of Terms ......................................................................................................... 41 17.2 Revision History ............................................................................................................ 43 17.3 Contact Information .......................................................................................................
Airstream 4001 F49-MRT User Guide Summary of Figures Figure 1 - Airstream 4001 F49-MRT.....................................................................错误!未定义书签。 Figure 2 - MRTe....................................................................................................错误!未定义书签。 Figure 3 - MRTe port panel ..................................................................................错误!未定义书签。 Figure 4 - LED Display ...............................................................................
Airstream 4001 F49-MRT User Guide Summary of Tables Table 1 - MRTe Frequency Ranges ............................................................................................... 12 Table 2 - Package Contents ........................................................................................................... 14 Table 3 - MRTe physical dimensions ............................................................................................. 15 Table 4 - MRTe port panel description ....................
Airstream 4001 F49-MRT User Guide Warnings and Cautions Human Exposure to Radio Frequencies The WiMAX MRTe Antennas should be installed a minimum distance of 20 cm (8 in) from your body. Radio Interference This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to internal vehicle radio communications.
Airstream 4001 F49-MRT User Guide DECLARATION OF CONFORMITY European Community, Switzerland, Norway, Iceland, and Liechtenstein Declaration of Conformity with Regard to the R&TTE Directive 1999/5/EC English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Deutsch: Dieses Gerät entspricht den grundlegenden Anforderungen und den weiteren entsprecheneden Vorgaben der Richtlinie 1999/5/EU.
Airstream 4001 F49-MRT User Guide FCC Notice Federal Communication Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Airstream 4001 F49-MRT User Guide 1 About this Guide This section discusses the purpose, intended audience, conventions, referenced documentation and organization for this guide. 1.1 Purpose The purpose of this User Guide is to provide step-by-step instructions for setting up and installing the Airstream 4001 F49-MRT. These procedures include: ¾ ¾ ¾ ¾ ¾ ¾ ¾ System Overview Installation Prerequisites Physical description Mounting Cabling Connecting Initial Procedure for Web-based Management 1.
Airstream 4001 F49-MRT User Guide 2 System Overview MRTe (Mobile Ruggedized Terminal - 16e) is a ruggedized hybrid device integrating 16e WiMAX CPE and WiFi Access Point functionalities in a single package. The MRTe was designed for nomadic and vehicular operation, providing high-speed data access through its WiMAX and WiFi interfaces. MRTe is deployed with external vehicle mounted antennas for WiMAX and either directly connected or external antennas for WiFi.
Airstream 4001 F49-MRT User Guide 2.4 Architecture The MRTe consists of the following components: ¾ Rugged hybrid device integrating WiMAX CPE and WiFi AP ¾ Weatherproof WIMAX antenna connectors (N type RF connector) ¾ Weatherproof WiFi antenna connectors (TNC connector) See Package Contents for additional information. 2.5 Theory of Operation For basic operation, the MRTe requires no initial configuration--simply plug and play. Configuration is automatically performed over the air by the BS.
Airstream 4001 F49-MRT User Guide 3 Installation Prerequisites Before installing your MRTe, read the following to ensure that: ¾ No items are missing from the package 3.1 Package Contents Examine the Airspan WiMAX MRTe shipping container. If you notice any damage, or missing items as listed in the Packing List, immediately notify the carrier that delivered the unit and contact an Airspan representative.
Airstream 4001 F49-MRT User Guide 4 Physical Description This section provides a description of the components of the MRTe installation: ¾ Dimensions ¾ Ports ¾ LEDs 4.1 MRTe The MRTe is an encased outdoor radio providing access to communication ports on its side panel. The MRTe provides holes for mounting. 4.1.1 Physical Dimensions The table below lists the physical dimensions of the MRTe. Table 3 ‐ MRTe physical dimensions Parameter Value Dimensions (H x W x D) 59.5 x 172 x 204 mm (2.34 x 6.
Airstream 4001 F49-MRT User Guide 5 Connections 5.1 Power Supply Connector Pinout The power supply connector provides 2-pin male contacts for cable connection. The connector is attached to the power adapter cable. Figure 1 ‐ Power pins ‐ power supply cable connector The connector’s pinout is described in the following table: Table 5 ‐Power connector Power Description 1 “-” power in 2 “+“ power in 5.
Airstream 4001 F49-MRT User Guide 6 Connecting WiMAX and WiFi Antennas Note: Antennas are ordered separately. Contact supplier. Caution: Before connecting the WiMAX or WiFi antennas, ensure that the MRTe is not connected to the power source. Caution: It is the responsibility of the person installing the MRTe to ensure that only those antennas certified with the product are used. The use of any antenna other than those certified with the product is expressly forbidden.
Airstream 4001 F49-MRT User Guide 7 Mounting This section describes the mounting procedures for the MRTe. 7.1 Mounting the MRTe Caution: Mount the MRTe in an orientation such that its port panel is accessible after mounting. This facilitates easy cable connection and disconnection. The MRTe provides mounting holes for attachment, as displayed in the figure below.
Airstream 4001 F49-MRT User Guide 8 Network Cabling The MRTe interfaces with the subscriber's network through the RJ-45 cable. Note: Use CAT-5e shielded cable only. 8.1 Connecting to Network The MRTe provides two RJ-45 (10/100/1000BaseT) ports for interfacing with the subscriber's network. The ports of the MRTe support Auto Negotiation, allowing automatic configuration for the highest possible speed link, and Full Duplex or Half Duplex mode. Therefore, the speed of the connected device (e.g.
Airstream 4001 F49-MRT User Guide 9 Connecting to Power The MRTe is powered from the 12/24 VDC power cable that is connected to the vehicle’s power source. The input power for the MRTe is 10-30 VDC. Caution: Before powering on the MRTe, ensure that some type of equipment such as anantenna or an RF attenuator is connected to the RF jacks. This eliminates the risk of irreversibly damaging the MRTe.
Airstream 4001 F49-MRT User Guide 10 Initial Procedure for Web-Based Management This chapter contains information on the Web-based Graphical User Interface (GUI). The GUI enables quick and simple setup, and discusses the following topics: ¾ ¾ ¾ Browser Requirements Configure and Connect Accessing the MRTe via the Web 10.1 Browser Requirements Ensure that your Web browser with which you want to access the Airstream 4001 F49-MRT is running Microsoft Internet Explorer 8, Firefox 3.0 and above.
Airstream 4001 F49-MRT User Guide Figure 5 ‐ Login 4. In the User Name field, enter your user name, default = root. 5. In the Password field, enter your password, default = admin. 6. Click Login to enter Note: It is highly recommended to change your Password after initial login. The Airstream 4001 F49-MRT server home page opens, Status, displaying current information of the Airstream 4001 F49-MRT System version and Network information, as displayed below. Figure 6 ‐ MRTe ‐ Status 10.
Airstream 4001 F49-MRT User Guide The Airstream 4001 F49-MRT menus are described in the table below: Table 6 ‐ Airstream 4001 F49‐MRT Menus Menu Description Status Opens the Status page where the following system status information (read-only) is displayed: WiMAX Status: ¾ System Status ¾ Physical Status ¾ Uplink ¾ Downlink ¾ Service Flow Network Status: ¾ LAN ¾ WAN ¾ WiFi Device Info: ¾ Device Information Opens the System page where: System ¾ SW Download ¾ Set Default ¾ Reboot Opens the WiMAX page wh
Airstream 4001 F49-MRT User Guide 11 Status The Status page is used for viewing system status information (read-only) related to the CPE and its related parameters and connections. To return to the Status page at any time click the Status button. To access the Status page: 1. Click Status to navigate to the Status page. 2. Click the desired sub-option on the drop down list. 11.1 WiMAX Status To view WiMAX status related parameters on the Status page: 1.
Airstream 4001 F49-MRT User Guide Parameter CINR3 Uplink Description Displays the CINR (Carrier to Interference Noise Ratio) value for reuse3 zone Displays Uplink information Modulation Displays the current uplink modulation Data rate Displays the current uplink data rate TX Packet Displays number of transmitted packets Downlink Displays Downlink information Modulation Displays the current downlink modulation Data Rate Displays the current downlink data rate RX Packet Displays number of recei
Airstream 4001 F49-MRT User Guide The parameters displayed (read-only) on the Network Status page are described in the table below: Table 9 ‐ Network status Parameter Description Interface Overview Displays current data for LAN, WAN and WiFi interfaces. ARP Displays the current status of the ARP table. Active IPv4 Routes • Ipv4-Address - displays address • MAC-Address - displays address • Interface - displays Displays the current status of the Routing table.
Airstream 4001 F49-MRT User Guide The parameters displayed (read-only) on the Device Information page are described in the table below: Table 10 ‐ Device Information Parameter Description Device Information Displays information on the device being used. Hardware Model Displays the hardware model. Product Type MRT Firmware Version Displays the firmware version in use. Firmware creation date Displays the date the firmware was created. Bootrom version Displays the bootrom version number.
Airstream 4001 F49-MRT User Guide 12 System To access the System page: 1. Click System to navigate to the System page. 2. Click the desired sub-option on the drop down list. 12.1 Reboot Some configuration settings require a restart of the unit to apply new parameter settings to the device, such as upgrading the software version. In order for upgrades and/or other changes to take effect the CPE must be rebooted, as shown below: To perform a Reboot 1.
Airstream 4001 F49-MRT User Guide 12.2 Reset to Default To set the product parameters to factory default settings: 1. Click on System to open the drop down list and choose the Reset to Default sub-option. Figure 12 ‐ System ‐ Reset to Default 2. Click on Click to Reset to Default to reset to factory defaults. Reset to cancel. Note: The Reset and Submit buttons are unavailable on this page. Note: After system reboots, logging-in is required. 12.
Airstream 4001 F49-MRT User Guide Figure 13 ‐ System Software Download 2. Configure the software upgrade parameters. 3. Check Perform SW Download and Run Shadow after Download. 4. Click Submit. After the download is completed the downloaded SW file will replace the existing file in the Shadow bank and the unit will reboot from the Shadow version. 5. Click on Click to Set as Main - to set the file as the main active SW version immediately.
Airstream 4001 F49-MRT User Guide Parameter Description Click to Set as Main The downloaded SW file is immediately set as the Main bank Note: this operation is allowed only if running from Shadow version. Click to Reset and Run from Shadow To reset and run the SW from the Shadow bank Note: this operation is allowed only when running from main version.
Airstream 4001 F49-MRT User Guide 13 WiMAX The WiMAX page is used to configure WiMAX scanning for a connection with a base station and enables you to add, delete and edit channels that the device will use during initial scanning. To access the WiMAX page: 1. Click WiMAX to navigate to the WiMAX page. 2. Click the desired sub-option on the drop down list. 13.
Airstream 4001 F49-MRT User Guide To add a new channel: 1. Click Add Row - to add new Channel row. Id. Number will be added automatically in ascending order. 2. Enter Frequency 3. Enter Bandwidth 4. Click Reset to discard any changes Or Click Submit to save the changes. 5. Click Save and Apply to apply changes immediately To delete a channel: 1. Check Sel - to select the Channel row to delete 2.
Airstream 4001 F49-MRT User Guide To select type of Authentication: 2. Click on the Authentication Type drop down list and choose either: • TTLS - to enable EAP-TTLS Authentication • TLS- - to enable EAP-TLS Authentication • None - to disable Authentication For EAP-TTLS Authenication: a. Check Use Configured Outer ID - Identity can be either: o Generated randomly (unchecked) or o Manually defined, check Use Configured Outer ID b. Define the Password c. Define the Username d.
Airstream 4001 F49-MRT User Guide 14 Network The Network page of the Airstream 4001 F49-MRT management enables you to configure Bridge mode or Router mode. To access the Network page: 1. Click Network to navigate to the Networking page. 2. Choose the desired sub-option from the drop-down list. 14.1 Mode (Router/Bridge) Configuration To access the Mode (Router/Bridge) page: 1. Click on Network to open the drop down list and choose the Mode sub-option. Figure 17 ‐ Networking ‐ Bridge mode 14.1.
Airstream 4001 F49-MRT User Guide If the network requires CPE WAN address to be allocated dynamically (by the network), then choose DHCP option. Else - choose static IP configuration. The “Protocol” parameter controls the mode: 2. Select Protocol. If Static IP is chosen, then configure the following parameters: 3. Enter IPv4 address. 4. Select IPv4 Netmask. 5. Enter IPv4 Gateway. Once finished: 6. Click Clear to discard any changes. Or Click Save to save the changes. 7. Click Save & Apply to save changes.
Airstream 4001 F49-MRT User Guide Figure 20 ‐ WAN Static IP Mask Options 14.1.3 LAN IP Configuration Only Static IP configuration should be used for LAN connection. LAN Static IP addressing Figure 21 ‐ LAN Static 14.2 DMZ The DMZ (Demilitarized Zone) page is used to allow a single computer on the LAN to be accessed from the Internet Note: Configuration of DMZ is only applicable in Router Mode. Note: Confirm the PC that is configured as the DMZ has CPE IP as its default gateway.
Airstream 4001 F49-MRT User Guide Figure 22 ‐ DMZ 2. Enter the IP address of the computer connected to the CPE’s LAN. The IP address should be on the same subnet as CPE’s LAN subnet 3. Check DMZ on - to enable DMZ 4. Check Allow redirect Ping to Host - to enable pinging to the PC behind the CPE 5. Check Allow CPE WEB access to Host - to enable web access to the PC behind the CPE 14.3 WiFi Note: Full WiFi support is currently under development and is planned for the near future.
Airstream 4001 F49-MRT User Guide 15 Logout To quit the Airstream 4001 F49-MRT at the end of a session or for maintenance. • Page 39 Click Logout. You will be re-directed to the Login page.
Airstream 4001 F49-MRT User Guide 16 Reboot Some configuration settings require that you restart the unit to apply new parameter settings to the device, such as upgrading the software version. In order for upgrades and/or other changes to take effect the CPE must be rebooted, as shown below: Figure 24 ‐ Airstream 4001 F49‐MRT ‐ Reboot To perform a Reboot 1. Click Reboot. A confirmation warning is displayed. 2. Click Perform reboot. A warning is displayed, “Please wait: Device rebooting…”.
Airstream 4001 F49-MRT User Guide 17 Appendix 17.1 Glossary of Terms BPSK Binary Phase Shift Keying BS Base Station BWA Broadband Wireless Access CID CPE dB Connection Identifier Number Customer Premises Equipment (interchangeable with ST) Decibel dBm Power ratio in dB (decibel) of the measured power referenced to one milliwatt DC Direct Current DL Downlink DVR Digital Voice Recorder FDD Frequency Division Duplex FEC Forward Error Correction FTP File Transfer Protocol GHz Gigahertz.
Airstream 4001 F49-MRT User Guide RF Rx SDA-4S Radio Frequency Receive Convenient term for either the SDA-4S Type II or SDA-4S/VL adapters SF Service Flow SME Small and Medium-sized Enterprise SNMP Simple Network Management Protocol SNR Signal-to-Noise Ratio ST Subscriber Terminal (interchangeable with CPE or SS) TDMA: Time Division Multiple Access. Technology for delivering digital wireless service using time-division multiplexing (TDM) Tx: Transmit UGS Unsolicited Grant Service.
Airstream 4001 F49-MRT User Guide 17.2 Revision History Revision Originator Date Description Rev A M. Falik 07-2012 Initial document Rev B M. Falik 04-2013 Additions and updates 17.3 Contact Information Customer Service Help-Desk for customer service emergency Airspan Networks have introduced the Airspan Tracker application to enable prompt and efficient Customer Support services.
