User's Manual

Mounting the Base Station Radio (BSR)
21
Wall-Mounting the BSR (Optional)
Note: The standard BSR kit provides pole-mounting brackets. If you want to wall-mount
the MicroMAX-SOC BSR contact your Airspan distributor for pricing and ordering of wall-
mounting brackets.
Note: A minimum of 3-meter separation is required between mounted MicroMAX-SOC's
and existing customer radio equipment when transmitting on different sectors (see figure
below). However, only a 1-meter separation is required between MicroMAX-SOC's when on
the same sector and transmitting to the same base station radio without requiring shielding.
The figure below illustrates the minimum separation between mounted MicroMAX-SOC's when
transmitting on different sectors:
MicroMAX-SOC wall mounting consists of two main stages:
Attaching the mounting bracket to the MicroMAX-SOC's mounting holes
Attaching the mounting bracket (already attached to the MicroMAX-SOC ) to the
wall (or pole)
To wall mount the MicroMAX-SOC:
1. Position the unassembled mounting bracket on the mounting surface (e.g. wall), and then
use a pencil to mark the position of the four mounting holes. Ensure that the distance
between the hole centers are 120 mm (height) and 60 mm (width), as displayed in the
figure below showing the MicroMAX-SOC's fixing dimensions.