User's Manual
Table Of Contents
- Purpose
- Targeted Audience
- Referenced Documentation
- Conventions
- Human Exposure to Radio Frequencies
- Radio Interference
- Avoiding Radio Interference
- Modifications
- General
- Manufacturer's Disclaimer Statement
- European Community, Switzerland, Norway, Iceland, and Liecht
- Declaration of Conformity with Regard to the R&TTE Directive
- MicroMAX-SOC Frequency Ranges
- Main Features
- Customer Benefits
- Architecture
- Power
- Models
- Package Contents
- Required Tools
- Radio Site Planning
- MicroMAX-SOC BSR
- SDA-4S Type II
- Mounting the MicroMAX-SOC
- Pole-Mounting the BSR
- Wall-Mounting the BSR (Optional)
- Installing the SDA-4S Type II
- Connecting the BSR to the SDA-4S
- SDA-4S Type II
- Connecting the SDA-4S Type II
- Connecting SDA-4S to Ethernet Network
- Connecting Lightning and Surge Protector
- Connecting Third Party External Antenna
- 1. Disclaimer
- 1.1 Safety Warnings
- 1.2 Important Warning Symbols
- 1.3 Important Service Information
- 1.4 UL Information
- 1.5 CE Notice
- 1.6 European Community, Switzerland, Norway, Iceland, and L
- 1.7 CAUTION
- 1.8 Lightning Protection
Physical Description
15
LEDs
The SDA-4S adapter provides LED indicators on the top panel, which are described in the table
below:
LED Color Status Meaning
On Physical link (10BaseT
or 100BaseT) between
SDA-4S adapter and
BSR
Blinking Traffic currently
flowing between SDA-
4S and BSR
UPLINK Yellow (100BaseT) or
Orange (10BaseT)
Off No link between SDA-
4S and BSR
On Physical link (10BaseT
or 100BaseT) between
SDA-4S and
subscriber's Ethernet
network
Blinking Traffic currently
flowing between SDA-
4S and subscriber's
Ethernet network
1, 2, 3, 4 Yellow (100BaseT) or
Orange (10BaseT)
Off No link between SDA-
4S and subscriber's
Ethernet network
On Power received by
SDA-4S
POWER Green
Off No power received by
SDA-4S
The figure below displays the LEDs which are located on the top panel of the SDA-4S Type II
adapter: