User's Manual
Table Of Contents
- Purpose
- Targeted Audience
- Referenced Documentation
- Conventions
- Human Exposure to Radio Frequencies
- Radio Interference
- Avoiding Radio Interference
- Modifications
- General
- Manufacturer's Disclaimer Statement
- European Community, Switzerland, Norway, Iceland, and Liecht
- Declaration of Conformity with Regard to the R&TTE Directive
- MicroMAX-SOC Frequency Ranges
- Main Features
- Customer Benefits
- Architecture
- Power
- Models
- Package Contents
- Required Tools
- Radio Site Planning
- MicroMAX-SOC BSR
- SDA-4S Type II
- Mounting the MicroMAX-SOC
- Pole-Mounting the BSR
- Wall-Mounting the BSR (Optional)
- Installing the SDA-4S Type II
- Connecting the BSR to the SDA-4S
- SDA-4S Type II
- Connecting the SDA-4S Type II
- Connecting SDA-4S to Ethernet Network
- Connecting Lightning and Surge Protector
- Connecting Third Party External Antenna
- 1. Disclaimer
- 1.1 Safety Warnings
- 1.2 Important Warning Symbols
- 1.3 Important Service Information
- 1.4 UL Information
- 1.5 CE Notice
- 1.6 European Community, Switzerland, Norway, Iceland, and L
- 1.7 CAUTION
- 1.8 Lightning Protection
9
INSTALLATION PREREQUISITES
Before installing your MicroMAX-SOC, review:
Package contents
Required tools
Radio Site planning
Package Contents
Examine the AS.MAX shipping container. If you notice any damage, or missing items as listed in the
Packing List, immediately notify the carrier that delivered the unit and contact a Airspan
representative.
The MicroMAX-SOC kit should contain the following items:
MicroMAX-SOC Base Station radio
DB15-to-RJ45 adapter for plugging into the BSR's 15-pin D-type port
Pole-mounting kit:
o
2 x M10 hex head screws
o
2 x M10 flat washers
o
2 x M10 spring lock washers
o
2 x M10 hex nuts
o
Mounting bracket
o
2 x M6 hex head screws
o
2 x M6 spring lock washers
o
Clamping bracket
o
2 x M8 'U'- bolts
o
4 x M8 hex nuts
o
4 x M8 plain washers
o
4 x M8 spring lock washers
Note: The standard MicroMAX-SOC kit does not include wall-mounting accessories. For
pricing and ordering of wall-mounting accessories, please contact your nearest Airspan
dealer.
Required Tools
The following tools are required to install the MicroMAX-SOC unit:
Torque wrench for N-type connectors (only relevant when implementing external antenna)
Cable stripping tool
10-, 13-, and 17-mm A/F open ended spanners
Radio Site Planning
Proper site selection and planning before installing your MicroMAX-SOC will ensure a successful
deployment of your AS.MAX system. A summary of the main site planning considerations is
provided below:
Minimum obstructions (e.g. buildings) in the radio path between base station and the
subscriber terminals
Mount radio as high as possible to avoid obstructions in the wireless path