User's Manual
Table Of Contents
- INTRODUCTION
- WARNINGS AND CAUTIONS
- DECLARATION OF CONFORMITY
- FCC NOTICE
- SYSTEM OVERVIEW
- INSTALLATION PREREQUISITES
- PHYSICAL DESCRIPTION
- BSDU DESCRIPTION
- GPS DESCRIPTION
- AC/DC POWER CONVERTER
- MOUNTING THE BASE STATION RADIO (BSR)
- MOUNTING THE BSDU
- MOUNTING THE GPS
- MOUNTING AC/DC POWER CONVERTER
- CABLING THE BSR
- CONNECTING THE SDA-4S TO THE POWER SUPPLY
- CONNECTING POWER CABLE FOR SDA-4SDC
- CONNECTING LIGHTNING AND SURGE PROTECTOR
- CONNECTING THIRD-PARTY EXTERNAL ANTENNAS
- TRADEMARKS AND COPYRIGHTS
- ENVIRONMENTAL
- CONTACT INFORMATION
- REVISIONS
- WARNINGS
- GLOSSARY
605-0000-742_MicroMAX_Hardware_Installation_Rev_G
16
MicroMAX is powered from the indoor integrated LAN switch:
Note: The SDA-4S Type II and the SDA-4SDC are physically (externally) the same other
than the power socket.
SDA-4S Type II
The SDA-4S Type II indoor unit (hereafter referred to as SDA-4S) is an integrated LAN switch,
providing power and four 10/100BaseT ports for interfacing with the subscriber’s network. The unit
is displayed in the figure below.
This subsection provides the following SDA-4S physical descriptions:
Dimensions
Ports
LEDs
Physical Dimensions
The SDA-4S physical dimensions are described in the table below:
Parameter Value
Dimensions Height - 200mm (7.87 inches)
Width - 150mm (5.9 inches)
Depth - 40mm (1.57 inches)
Weight 0.53 Kg