User's Manual

605-0000-742_MicroMAX_Hardware_Installation_Rev_H

7. Connect the opposite ends of the cable to the DC output on the Rear Panel of the AC/DC

Converter as follows:

a. The +VDC (Positive) output of the AC/DC converter is connected to the + Positive

(Red) input on the BSDU

b. The -VDC (NEGATIVE) output of the AC/DC converter is connected to the - Negative

(Black) input on the BSDU

c. The rear panels of the BSDU and AC/DC converter, as shown below:

8. Connect the AC/DC converter to AC Power and verify that:

a. On the AC/DC converter:

i. DC Supply module fans start up

ii. Green AC OK LED is lit

iii. DC OK LED is lit

b. On the BSDU:

i. All LEDs on the front panel are lit for several seconds

ii. The POWER LED on the front panel remains lit