User's Manual

Mounting the Base Station Radio (BSR)

5. Attach the MicroMAX to the mounting bracket by performing the following:

a. Slide an M10-spring lock washer and then an M10-plain washer onto each M10-hex

head screw (ensure lock washer is nearest to head of screw bolt).

b. Align the mounting bracket's holes with the MicroMAX's mounting holes as displayed

below. (The mounting bracket side that provides a groove for inserting a nut must be

aligned with the MicroMAX's mounting hole that is nearest to the MicroMAX's bottom

panel.)

c. From the external sides, insert the M10-hex head screws through the mounting

bracket's holes and MicroMAX's mounting holes. Loosely fasten with the M10-hex nuts.