User's Manual

Mounting the Base Station Radio (BSR)
29
To pole mount the MicroMAX BSR:
1. Attach the mounting bracket to the MicroMAX:
a. Align the mounting bracket with the MicroMAX's mounting holes so that the mounting
bracket's side with the built-in nut is aligned with the BSR's mounting holes furthest
from the MicroMAX's bottom panel, as shown in the figure below.
b. Slide an M10-flat washer and M10-spring lock washer onto an M10-hex head screw
(ensure spring lock washer is closest to the bolt's head). From the external side, insert
the M10-hex head screw through the mounting bracket and MicroMAX's mounting
holes. Fasten the M10-hex head screw (one is provided with a built-in nut while the
other requires you to insert an M10-hex nut into the MicroMAX's mounting hole).