User's Manual

12
INSTALLATION PREREQUISITES
Before installing your MicroMAX, review:
Package contents
Required tools
Radio Site planning
Package Contents
Examine the AS.MAX shipping container. If you notice any damage, or missing items as listed in the
Packing List, immediately notify the carrier that delivered the unit and contact a Airspan
representative.
The MicroMAX kit should contain the following items:
MicroMAX Base Station radio
DB15-to-RJ45 adapter for plugging into the BSR's 15-pin D-type port
Pole-mounting kit:
o 2 x M10 hex head screws
o 2 x M10 flat washers
o 2 x M10 spring lock washers
o 2 x M10 hex nuts
o Mounting bracket
o 2 x M6 hex head screws
o 2 x M6 spring lock washers
o Clamping bracket
o 2 x M8 'U'- bolts
o 4 x M8 hex nuts
o 4 x M8 plain washers
o 4 x M8 spring lock washers
The GPS (optional) kit should contain the following items:
GPS Smart Antenna RS422
Conn DB15PM AMP - for discrete wires IDC
Connector, Circular (Deutsch IMC26-2212X) - Industrial Micro 12P F
Cable 4x2422# (Teldor) - 10 meters
8x Contact sockets (for Deutsch 6862-20122278) - Circular Micro connectors
Boot shrink w/ glue (Raychem) - heat shrink
Plastic Hood 15-Pin - D-Type sub-connector
Note: The standard MicroMAX kit does not include wall-mounting accessories. For pricing
and ordering of wall-mounting accessories, please contact your nearest Airspan dealer.
Required Tools
The following tools are required to install the MicroMAX unit:
Torque wrench for N-type connectors (only relevant when implementing external antenna)
Cable stripping tool