User's Manual

605-0000-742_MicroMAX_Hardware_Installation_Rev_H
60
7. Connect the opposite ends of the cable to the DC output on the Rear Panel of the AC/DC
Converter as follows:
a. The +VDC (Positive) output of the AC/DC converter is connected to the + Positive
(Red) input on the BSDU
b. The -VDC (NEGATIVE) output of the AC/DC converter is connected to the - Negative
(Black) input on the BSDU
c. The rear panels of the BSDU and AC/DC converter, as shown below:
8. Connect the AC/DC converter to AC Power and verify that:
a. On the AC/DC converter:
i. DC Supply module fans start up
ii. Green AC OK LED is lit
iii. DC OK LED is lit
b. On the BSDU:
i. All LEDs on the front panel are lit for several seconds
ii. The POWER LED on the front panel remains lit