User's Manual
Table Of Contents
- INTRODUCTION
- WARNINGS AND CAUTIONS
- DECLARATION OF CONFORMITY
- FCC NOTICE
- SYSTEM OVERVIEW
- INSTALLATION PREREQUISITES
- PHYSICAL DESCRIPTION
- BSDU DESCRIPTION
- GPS DESCRIPTION
- AC/DC POWER CONVERTER
- MOUNTING THE BASE STATION RADIO (BSR)
- MOUNTING THE BSDU
- MOUNTING THE GPS
- MOUNTING AC/DC POWER CONVERTER
- CABLING THE BSR
- CONNECTING THE SDA-4S TO THE POWER SUPPLY
- CONNECTING POWER CABLE FOR SDA-4SDC
- CONNECTING BSDU TO AC/DC POWER CONVERTER
- CONNECTING LIGHTNING AND SURGE PROTECTOR
- CONNECTING THIRD-PARTY EXTERNAL ANTENNAS
- TRADEMARKS AND COPYRIGHTS
- ENVIRONMENTAL
- CONTACT INFORMATION
- REVISIONS
- WARNINGS
- GLOSSARY
Connecting BSDU to Ac/DC Power converter
59
4. Connect the RED crimped wire from the 25-pin cable now to Port J1 on the back panel of
the AC/DC Converter to the +VDC (Positive) output of the AC/DC Converter on the back
panel, as shown below.
5. Check the back panel of the BSDU and AC/DC Convertor appears as below:
6. Connect the power cable terminated with the Anderson Powerpole connectors to the -48V
input on the front panel of the BSDU, as shown below.