User's Manual

Mounting the Base Station Radio (BSR)
37
To wall mount the SDA-4S:
1. On the wall, mark the position of the two mounting hooks. The dimensions of the wall-
mounting hooks are displayed in the template below.
2. Drill holes for each hole that you marked in the step above.
3. Insert wall anchors (supplied) into each of the drilled holes.
4. Insert the 9-inch screws (supplied) into the wall anchors. Ensure at least 2 mm of the screw
is exposed to allow insertion into the SDA-4S mounting holes.
5. Hold the SDA-4S with both hands, and align the entrance to the two mounting hooks with
the screws. Slide the screws into the mounting hooks, by lowering the SDA-4S onto the
screws.
Note: For safety, both mounting hooks must be utilized when mounting the unit.
Note: The SDA-4S is supplied with a 1-metre AC power lead assembly. Therefore, ensure
the unit is mounted within reachable distance to the customer's mains power outlet.
Note: The maximum cable run between SDA-4S and MicroMAX is 100 meters. Therefore,
ensure the unit is mounted within reachable distance.