User's Manual
Table Of Contents
- 1 About this Guide
- 2 Introduction
- 3 Getting Started
- 4 Verify Prerequisites
- 5 Install MacroMAXe
- 6 Connect and Manage Cables
- 7 Set Power System
- 8 Appendix A
- 9 Appendix C – Glossary of Terms
- 10 Appendix D – Installation Checklist
- 11 Appendix E
MacroMAXe Installation Guide
Page 46 Commercial in Confidence UGD-D00181 Rev E
7 Set Power System
Hazardous voltage! Before working, ensure that the power is removed from the
power connection cables. When the system is powered on, do not touch the
power terminals.
7.1 Power Input - DC
Each unit is provided with a 3/10/30 meter 48 volt power cable terminated with a male connector at
one end and a female connector at the other.
Connection Color
Neutral
(Cold)
Blue
Live (Hot) Brown
Table9‐DCPowerinput
Caution: It is important that the power connector is attached at the correct end
(see illustration below) or damage to the connector/equipment will result.
Figure29–DCPowerconnectorcable