User's Manual
Table Of Contents
- 1 About this Guide
- 2 Introduction
- 3 Getting Started
- 4 Verify Prerequisites
- 5 Install MacroMAXe
- 6 Connect and Manage Cables
- 7 Set Power System
- 8 Appendix A
- 9 Appendix C – Glossary of Terms
- 10 Appendix D – Installation Checklist
- 11 Appendix E
MacroMAXe Installation Guide
Page 17 Commercial in Confidence UGD-D00181 Rev E
1 About this Guide
This section discusses the purpose, intended audience, conventions, referenced documentation and
organization for this guide.
1.1 Purpose
This guide provides the workflow and step-by-step procedures for Installing the MacroMAXe. These
procedures include:
¾ Verify Prerequisites
¾ Install the MacroMAXe
¾ Connect and Manage Cables
¾ Set Power System
1.2 Intended Audience
This guide is intended for persons who are responsible for Installing the MacroMAXe. These persons
should have a working knowledge of the WiMAX system.
1.3 Conventions
This document uses the following informational conventions.
Icon
Description
Checkpoint: Marks a point in the workflow where there may be an exit or branch
to some other procedure. At each Checkpoint the reason for an exit or branch is
given along with specific directions to locate the entry point in the other
procedure.
Reference: Gives a resource in the workflow that may be needed to complete a
procedure along with specific directions to use the resource.
Caution: Describes a possible risk and how to lessen or avoid the risk.
Advice: Provides a recommendation based on best practice.
Note: Provides useful information.
1.4 Referenced Documentation
¾ MacroMAXe Product Description
¾ Job Sheet
1.5 Organization of this Guide
This guide is organized into the following Sections: