User's Manual

605-0000-742_MicroMAX_Hardware_Installation_Rev_H

GPS-to-BSDU cable connection

Notes:

♦When installing the cable, secure the cable to the mounting pole or bracket with a cable tie

to hold the weight of the cable (i.e. cable strain relief).

♦A loop should be left in the dressed cable for maintenance purposes and to prevent the

cable weight being taken directly on the connector itself.

♦Ensure that the connector is waterproof.

GPS Alignment

Many GPS reception problems can be reduced, to some degree, by careful antenna site

selection.

Place the GPS so that unobstructed line-of-sight reception is possible from horizon to

horizon and at all bearings and elevation angles from the antenna. This is the ideal

situation, which may not be possible under actual operating conditions.

Try to place the GPS as far as possible from reflective objects, especially reflective objects

that are above its radiation pattern horizon. Close-in reflections cause strong multipath

signals.

Care should also be taken to avoid coiling the GPS cable around the mounting base and

pinching the cable in windows or doors.