User Manual

Air4G Installation Guide
Page 38 Commercial in Confidence UGD-D00181 Rev G
5.3 Air4G Connections
The following diagram displays the connections on the bottom side of the Air4G.
The base station requires a secure ground connection. The cable should also be grounded to the
tower which is grounded at the tower base. A grounding screw fitted with a flat washer and lock
washer is provided on the bottom of the chassis clearly marked with the universal ground symbol as
shown below.
Figure 16 - Air4G connections (bottom)
5.4 Install Air4G Antennas
Use this procedure to install a linear dual slant antenna for the Air4G in the mast mount configuration.
Figure 17 Air4G External Antenna Configuration
Note: Separate antenna distance according to RF planning.