User Manual

Air4G Installation Guide
Page 37 Commercial in Confidence UGD-D00181 Rev G
Caution: This unit weighs 17 kg 17.6 kg, take care when lifting.
4. Screw the bottom two screws and washers into the two standoff fittings at the bottom of the
Air4G enclosure.
5. Tighten all fixing screws.
5.2.1 Mounting Examples
The following displays a typical wall mount.
Figure 14 - Wall mount
Note: The GPS bracket (pre-assembled) is on the (back) side closest to the wall
so as not to interfere with the sunshield assembly.
The following displays a possible assembly alternative in the event of interference to the GPS by
equipment already in place.
Figure 15 - GPS alternative assembly