User Manual

Air4G Installation Guide
Page 36 Commercial in Confidence UGD-D00181 Rev G
The following diagram depicts the Wall Plate Details.
Figure 13 – Wall Mounted Air4G Wall Plate Details
To mount the Air4G in the wall mount configuration, perform the following steps:
1. Attach the Wall Plate to the wall at the height required to attach the Air4G.
2. Fasten the Hangars to the rear side of the Air4G enclosure, position the niched Hangar so it is
lower on the wall with the niche facing down.
3. Lift the enclosure and place the screws through the head clearance holes and position the
unit so that the top mounting holes retain the unit.