User Manual

Air4G Installation Guide
Page 26 Commercial in Confidence UGD-D00181 Rev G
4.2 Verify Installation Requirements
4.2.1 Verify the Tools
Table 8 - Air4G installation tools
Tool
Large Crosshead Screw driver Phillips # 3 or Pozidrive # 3
Small flat blade screwdriver
Medium flat blade screwdriver
13mm or 1/2 inch open ended spanner
10mm or 13/32 inch open ended spanner
Wire strippers
Wire cutters
Ring terminals crimp tool
RJ45 crimp tool
4.2.2 Verify the Parts and Kits
Table 9 - Air4G installation parts and kits
Air4G Base Station parts
Consisting of
1 x Air4G unit
Base station unit
3 x RJ45 Weatherproof
Connector Covers
Weatherproof connector covers for use with standard cat 5 RJ45
network connections.
1 x mains cable 14AWG
x2 (ordered separately)
30 meter lead with M17 3 pole plug
When distance from outdoor Power supply to Base Station is over 30 meters additional power cable
must be connected via a junction box (ordered separately) for total distance of up to 130 meters.
14AWG x2 (ordered separately) – up to 40 meters
12AWG x6 (ordered separately) – up to 100 meters
1 x Ethernet RJ45
environmental shroud
LTW IP68 or Amphenol environmental connector
1 x Sunshield fixing kit
(optional) (ordered
separately) including quad
antenna adaptor brackets
(x 2).
M8 x 20 Hex Cap screws - 12
M8 plain washers - 12
M8 spring washers – 12
M8 Hex nuts - 4
M12 x 20 screws – 4
M12 nuts – 4
M12 flat washers – 4
M12 spring washers - 4