User Manual

Air4G-W24 Installation Guide
Page 29 Commercial in Confidence UGD-D00181 Rev G
Air4G-W24 Base
Station parts
Consisting of
1 x Sunshield fixing kit
(optional) (ordered
separately) including
quad antenna adaptor
brackets (x 2).
M8 x 20 Hex Cap screws - 12
M8 plain washers - 12
M8 spring washers – 12
M8 Hex nuts - 4
M12 x 20 screws – 4
M12 nuts – 4
M12 flat washers – 4
M12 spring washers - 4
Note: The Sunshield brackets are only applicable for antennas that utilize
Mechanical Electric Tilt (MET). i.e. – Argus-SSPX310F.
Warning: A Sunshield is mandatory for temperatures of above 45°.
1 x Air4G-W24
installation mount kit
(ordered separately)
M8 x 20 Hex Cap screws – 8
M8 Hex nuts - 4
M8 plain washers – 8
M8 spring washers - 8
Pole Mount Bracket
Assembly:
Dia. 120-170 mm – top
& bottom – plus fixing
accessories.
Dia. 170-230 mm – top
& bottom – plus fixing
accessories.
(ordered separately)
Accessories included
Pole Mount Bracket
Assembly:
Dia. 60-120 mm – top
& bottom – plus fixing
accessories.
(ordered separately)
Accessories included
1 x earth kit
1 x M5 screws
1 x M5 washers
1 x M5 spring washers
Alternative: SEMS screw (includes 2 washers)