User's Manual

Air4G-W24 Installation Guide
Page 59 Commercial in Confidence UGD-D00181 Rev G
7 Set Power System
Hazardous voltage! Before working, ensure that the power is removed from the
power connection cables. When the system is powered on, do not touch the
power terminals.
7.1 Power Input - DC
Each unit is provided with a 3/10/30 meter 48 volt power cable terminated with a female
connector at one end to be connected to the Power connector on the bottom panel of the Air4G-
W24 and bare wires at the other.
Caution: It is important that the power connector is attached at the correct end or
damage to the connector/equipment will result.
Note: Check Power Supply for proper polarization.
Figure 44 – DC Power connection
Figure 45 - Power connector – Air4G-W24 bottom panel