User's Manual

Air4G-W24 Installation Guide
Page 53 Commercial in Confidence UGD-D00181 Rev G
Figure 35 - Quad port antenna connection – 2
5.8 GPS Antenna Assembly
To mount the GPS antenna directly on the Air4G-W24:
1. Route the RG58 cable through the flat washer and the 2 nuts (supplied).
2. Position the RG58 cable below the mounting hole on the GPS antenna mounting bracket,
as shown below:
Figure 36 - GPS cable assembly prior to mounting
3. Hand-tighten the RG58 cable TNC (90°) connector to the mating connector on the GPS
antenna.