User's Manual

Air4G-W24 Installation Guide
Page 35 Commercial in Confidence UGD-D00181 Rev G
Parameter
Value
Comment
Weight
Aprox. 17 kg (37.47 lbs.)
Table 18 - Air4G-W24 2.x & 0707 physical dimensions
Parameter
Value
Comment
Height
410 mm (16.14 inches)
The physical dimensions exclude handles and
connectors.
Width
350 mm (13.78 inches)
Depth
170 mm (6.69 inches)
Weight
Aprox. 17.6 kg (38.80 lbs.)
RF Ports for antenna connections are N-Type Female connectors located on the top of the Air4G-
W24 enclosure. Adjacent to these are SMA connectors used for RF monitoring purposes during
installation / maintenance. For normal operation, these are covered with a weatherproof cap.
A 16m RG58 cable connects a remote mounted GPS antenna to the Air4G-W24 or 80cm cable
for connection directly on the Air4G-W24 by way of TNC connectors. Alternatively, an 80cm,
cable connects the GPS directly to the top of Air4G-W24. The cable assembly for the remote GPS
antenna is shown below.
Figure 9 – Air4G-W24 Cable Assembly for GPS Antenna
Figure 10 - Lightning/Surge protector (required)
4.2.3.2 Junction Box (Optional)
The Junction box (optional) is an outdoor enclosure that measures 160 mm (6.3 in.), 160 mm (6.3
in.) and 75 mm (2.95 in.). The unit is shown below with the pole mounting bands assembled. The
Junction box is required when the distance from the outdoor Power supply to Base Station is over
30 meters for total distance of up to 130 meters.
Note: If – 48 volt DC can be verified and guaranteed the Junction box may not be
required. Contact customer support to determine.