User's Manual

Air4G-W24 Installation Guide
Page 33 Commercial in Confidence UGD-D00181 Rev G
Optional Junction Box
Consisting of
2x mounting bracket(s) for pole and wall
mounting
Bracket (x2)
2x pole bands (stainless steel), as required,
supplied.
52 – 76 mm (3”)
2x pole bands (stainless steel), as required,
supplied.
78 – 102 mm (4”)
Mounting screws – for mounting brackets to
junction box.
EJOT WN1412 – K50 x 12 – 4 supplied.
Wall mounting fasteners
Hole size = 7 mm
Sufficient cable wires ties, as required
(not supplied - customer responsibility)
4.2.3 Verify Components
Air4G-W24 is shown below from the Ethernet termination and RF port end views respectively.