User's Manual

Air4G-W24 Installation Guide

Page 30 Commercial in Confidence UGD-D00181 Rev G

Air4G-W24

Base Station

parts

Consisting of

Filter (Cavity

filter) Kit (for

2.3 GHz

variant only)

(U.S.A. – WCS

market only)

2 x Cavity Filters – 141-00-148

4 x antenna cables – 689-000-47

The Air4G-W24 power supply (PS) can be installed with various cable lengths according to the

site requirements. The cable lengths are determined by the length of the run between the PS and

the Air4G-W24. Use the following table to determine the required power supply output to ensure

proper operation of the Air4G-W24.

Table 11 - Input Power for Air4G-W24

Air4G-W24 2x10

(2.3-2.7 GHZ)

Air4G-W24 0707

(698-746 MHz)

Air4G-W24 3x05

(3.3-3.38 GHZ)

Input Voltage to Air4G-W24 (1)

-38 VDC to -60 VDC

PS output Voltage – 30 meter cable

(2)

-42 VDC min

-41 VDC min

PS output Voltage – 75 meter cable

(2)

-50 VDC min

-46 VDC min

PS output Voltage – 100 meter

cable (2)

-53 VDC min

-49 VDC min

Figure 6 - PS – Air4G-W24