User's Manual

Air4G-W24 Installation Guide
Page 29 Commercial in Confidence UGD-D00181 Rev G
Air4G-W24
Base Station
parts
Consisting of
1 x earth kit
1 x M5 screws
1 x M5 washers
1 x M5 spring washers
Alternative: SEMS screw (includes 2 washers)
GPS antenna
& accessories
(each ordered
separately)
1x GPS Antenna. An active GPS antenna which, by using the appropriate
mounting bracket, can be used with Air4G-W24 for network synchronization.
For mounting directly to the top of Air4G-W24, this GPS Antenna should be
used in conjunction with Air4G-W24 GPS Antenna mounting bracket w/Handle
pre-assembled on the Air4G-W24 and the 80cm GPS Cable RG58 TNC-TNC.
When mounting remotely from the base station unit, this antenna should be
used in conjunction with the Remote GPS Antenna Mounting Bracket (GPS-
MNT-1) and the 16m GPS Cable RG58 TNC-TNC.
80cm or 16m Cable Assembly - 80cm (CBL-GPS-TNC-0.8-1) or 16m (CBL-
GPS-TNC-16-1) RG58 cable. 16m connects remote mounted GPS Antenna
(GPS-ANT-1) to the Air4G-W24 via TNC connectors. The 80cm, cable for
mounting GPS directly to the top of Air4G-W24.
GPS
Lightning/Surg
e protector
(ordered
separately)
1x Lightning/Surge protector (required)
AC/DC Power
Supply (PS)
Indoor power converter for 700 MHz
Indoor power converter for 2.xGHz
Outdoor power converter for 3.xGHz
Type-IC DC
Power Cable
Available either in - 10, 15 or 30 meter lengths. Additional lengths available.
ODC Twin
Fiber Cable
(Multimode)
(optional)
(ordered
separately)
Available either in - 10, 15, 30, 50, 75 or 100 meter lengths.
Note: Maximum up to 500 meters as this is a
multimode interface.
Multimode
fiber pigtail
cable (not
included)
(optional)
(ordered
separately)
Multimode fiber pigtail cable – ODC - LC connector. Terminates the outdoor
fiber cable and provides an indoor LC connector. 2 meter length.
Grounding
Cable
(required) (not
included)
Circular earth braid, 120A current (16 mm²), jacketed or not with cable size =
AWG 4 – 6 with lug (terminal) on enclosure side with hole M6