User's Manual
Air4G-W24 Installation Guide
Page 28 Commercial in Confidence UGD-D00181 Rev G
Air4G-W24
Base Station
parts
Consisting of
1 x Sunshield
fixing kit
(optional)
(ordered
separately)
including quad
antenna
adaptor
brackets (x 2).
M8 x 20 Hex Cap screws - 12
M8 plain washers - 12
M8 spring washers – 12
M8 Hex nuts - 4
M12 x 20 screws – 4
M12 nuts – 4
M12 flat washers – 4
M12 spring washers - 4
Note: The Sunshield brackets are only applicable for antennas that utilize
Mechanical Electric Tilt (MET). i.e. – Argus-SSPX310F.
Warning: A Sunshield is mandatory for temperatures of above 45°.
1 x Air4G-W24
installation
mount kit
(ordered
separately)
M8 x 20 Hex Cap screws – 8
M8 Hex nuts - 4
M8 plain washers – 8
M8 spring washers - 8
Pole Mount
Bracket
Assembly:
Dia. 120-170
mm – top &
bottom – plus
fixing
accessories.
Dia. 170-230
mm – top &
bottom – plus
fixing
accessories.
(ordered
separately)
Accessories included
Pole Mount
Bracket
Assembly:
Dia. 60-120
mm – top &
bottom – plus
fixing
accessories.
(ordered
separately)
Accessories included