User's Manual

Air4G-W24 Installation Guide
Page 27 Commercial in Confidence UGD-D00181 Rev G
4.2 Verify Installation Requirements
4.2.1 Verify the Tools
Table 9 - Air4G-W24 installation tools
Tool
Large Crosshead Screw driver Phillips # 3 or Pozidrive # 3
Small flat blade screwdriver
Medium flat blade screwdriver
13mm or 1/2 inch open ended spanner
10mm or 13/32 inch open ended spanner
Wire strippers
Wire cutters
Ring terminals crimp tool
RJ45 crimp tool
4.2.2 Verify the Parts and Kits
Table 10 - Air4G-W24 installation parts and kits
Air4G-W24
Base Station
parts
Consisting of
1 x Air4G-W24
unit
Base station unit
2 x RJ45
Weatherproof
Connector
Covers
Weatherproof connector covers for use with standard cat 5 RJ45 network
connections.
Note: Previous versions had 3 RJ45 connections.
1 x mains
cable 14AWG
x2 (ordered
separately)
30 meter lead with M17 3 pole plug
When distance from outdoor Power supply to Base Station is over 30 meters additional power
cable must be connected via a junction box (ordered separately) for total distance of up to 130
meters.
14AWG x2 (ordered separately) – up to 40 meters
12AWG x6 (ordered separately) – up to 100 meters
1 x Ethernet
RJ45
environmental
shroud
LTW IP68 or Amphenol environmental connector