User's Manual

Air4G-W24 Installation Guide
Page 23 Commercial in Confidence UGD-D00181 Rev G
Figure 3 - Air4G-W24 – each sector connected separately
Note: Air4G-W24 can also be connected via a LAN Switch for greater Failsafe
protection.
Note: When the Fiber-Optic cable connection is employed the Ethernet cable
connection (Eth 1) is disabled.
Note: Auto-negotiation must always be enabled on the core network side.
Note: The Ethernet connection (Eth 2) can be enabled / disabled via the Air4G-
W24 WEB interface to prevent unauthorized use. Check to enable, uncheck to
disable. See General Config.
Note: Illustration above displays the GPS connected directly to the top of the
units there is also a remote GPS antennae option.
The Air4G-W24 is a fully integrated all outdoor base station sector that contains all RF, Baseband,
GPS Synchronization and 3-sector aggregation functionality. In one box it comprises the
following functional elements:
 Quad Receiver / Dual Transmitter
 SDR Card
 Ethernet Switch
 GPS