User Manual

Air4G-W24 Installation Guide
Page 48 Commercial in Confidence UGD-D00181 Rev G
3. Use the mounting brackets provided with the antenna(s).
4. Carefully connect the antenna and mast assembly to its mounting bracket and tighten the
clamp bolts.
Note: This assembly requires more than one (1) person to assemble in place.
The recommended distance between Omni antennas is determined by the frequency band,
as shown in the table below:
Frequency
Distance between antennas
3.x
0.85 meters
2.x
1.20 meters
0707
4 meters
5.5 Optional Mounting Antenna on Air4G-W24
Either Antenna shown can be mounted on the Air4G-W24 unit or mast mounted.
Note: The sunshield kit is required for this type of assembly. Contact your
supplier to order.
5.5.1 Variable Tilt Antenna
There is a Variable Tilt Antenna available for mounting on the Air4G-W24. The antenna maybe
connected directly to the Air4G-W24 with no need for physical tilting of the antenna.The Manual
Electric Tilt (MET) antenna has a rotating nut that adjusts a threaded rod which moves in and out
while displaying a tilt scale, as shown below.
Figure 30 - Variable tilt antenna