User Manual

Air4G-W24 Installation Guide
Page 41 Commercial in Confidence UGD-D00181 Rev G
The following diagram depicts the Wall Plate Details.
Figure 19 – Wall Mounted Air4G-W24 Wall Plate Details
To mount the Air4G-W24 in the wall mount configuration, perform the following steps:
1. Attach the Wall Plate to the wall at the height required to attach the Air4G-W24.
2. Fasten the Hangars to the rear side of the Air4G-W24 enclosure, position the niched
Hangar so it is lower on the wall with the niche facing down.
3. Lift the enclosure and place the screws through the head clearance holes and position
the unit so that the top mounting holes retain the unit.