User Manual
Table Of Contents
- 1 About this Guide
- 2 System Overview
- 3 Installation Prerequisites
- 4 Physical Description
- 5 BSDU Description
- 6 GPSD Description
- 7 GPS Description
- 8 AC/DC Power Converter
- 9 Mounting the Base Station Radio (BSR)
- 10 Mounting the BSDU
- 11 Mounting the GPS
- 12 Mounting the AC/DC Power Converter
- 13 Cabling the BSR
- 14 Connecting the SDA-4S to the power supply
- 15 Connecting Power Cable for SDA-4SDC
- 16 Connecting BSDU to AC/DC Power converter
- 17 Lightning and Surge Protection
- 18 Connecting Third-Party External Antennas
- 19 Appendix
MicroMAX Hardware Installation User Guide
Page 38 Commercial in Confidence UWB-D00068 Rev J
Figure13‐GPSDtoppanel
6.4 Mounting the GPSD
The GPSD is mounted vertically on a wall in the communication center within connection distance
of the SDA-4S(s) it services. Wall mounting is made possible by the existence of two mounting
hooks molded into the GPSD's bottom panel, as displayed in the figure below.
Figure14‐Wallmount