User Manual
Table Of Contents
- 1 About this Guide
- 2 System Overview
- 3 Installation Prerequisites
- 4 Physical Description
- 5 BSDU Description
- 6 GPSD Description
- 7 GPS Description
- 8 AC/DC Power Converter
- 9 Mounting the Base Station Radio (BSR)
- 10 Mounting the BSDU
- 11 Mounting the GPS
- 12 Mounting the AC/DC Power Converter
- 13 Cabling the BSR
- 14 Connecting the SDA-4S to the power supply
- 15 Connecting Power Cable for SDA-4SDC
- 16 Connecting BSDU to AC/DC Power converter
- 17 Lightning and Surge Protection
- 18 Connecting Third-Party External Antennas
- 19 Appendix
MicroMAX Hardware Installation User Guide
Page 24 Commercial in Confidence UWB-D00068 Rev J
4 Physical Description
This section provides a description of the components of the MicroMAX installation:
¾ MicroMAX (outdoor unit)
¾ SDA-4S Type II (indoor unit)
¾ SDA-4SDC Type II (indoor DC unit)
4.1 MicroMAX BSR
The BSR is an encased outdoor radio providing access to communication ports on its bottom
panel. The BSR's back panel provides holes for mounting.
4.1.1 Physical Dimensions
The table below lists the physical dimensions of the BSR.
Table5‐BSRDimensions
Parameter Value Comment
Height 400 mm (15.74 inches)
Width 317 mm (12.48 inches)
Depth 65.5 mm (2.58 inches)
Weight 3.8 kg
The physical dimensions exclude the mounting kit.
The figure below illustrates the MicroMAX's physical dimensions.
Figure3‐BSRports