User Manual

MicroMAX Hardware Installation User Guide 

Page 22 Commercial in Confidence UWB-D00068 Rev J
3 Installation Prerequisites
Before installing your MicroMAX, review:
¾ Package Contents
¾ Required tools
¾ Radio Site planning
3.1 Package Contents
Examine the AIRSPAN WIMAX shipping container. If you notice any damage, or missing items as
listed in the Packing List, immediately notify the carrier that delivered the unit and contact a
Airspan representative.
The MicroMAX kit should contain the following items:
¾ MicroMAX Base Station radio
¾ DB15-to-RJ45 adapter for plugging into the BSR's 15-pin D-type port
¾ Pole-mounting kit:
o 2 x M10 hex head screws
o 2 x M10 flat washers
o 2 x M10 spring lock washers
o 2 x M10 hex nuts
• Mounting bracket
o 2 x M6 hex head screws
o 2 x M6 spring lock washers
• Clamping bracket
o 2 x M8 'U'- bolts
o 4 x M8 hex nuts
o 4 x M8 plain washers
o 4 x M8 spring lock washers
The GPSD (optional) kit should contain the following items:
¾ GPSD (AC or DC)
¾ Power cable – for AC
¾ GPS antenna
¾ 4 “Y” cables
The GPS kit should contain the following items:
¾ GPS Smart Antenna RS422
¾ Conn DB15PM AMP - for discrete wires IDC
¾ Connector, Circular (Deutsch IMC26-2212X) - Industrial Micro 12P F
¾ Cable 4x2422# (CAT-5e) - 10 meters
¾ 8x Contact sockets (for Deutsch 6862-20122278) - Circular Micro connectors
¾ Boot shrink w/ glue (Raychem) - heat shrink
¾ Plastic Hood 15-Pin - D-Type sub-connector