User Manual
Table Of Contents
- 1 About this Guide
- 2 System Overview
- 3 Installation Prerequisites
- 4 Physical Description
- 5 BSDU Description
- 6 GPSD Description
- 7 GPS Description
- 8 AC/DC Power Converter
- 9 Mounting the Base Station Radio (BSR)
- 10 Mounting the BSDU
- 11 Mounting the GPS
- 12 Mounting the AC/DC Power Converter
- 13 Cabling the BSR
- 14 Connecting the SDA-4S to the power supply
- 15 Connecting Power Cable for SDA-4SDC
- 16 Connecting BSDU to AC/DC Power converter
- 17 Lightning and Surge Protection
- 18 Connecting Third-Party External Antennas
- 19 Appendix
MicroMAX Hardware Installation User Guide
Page 19 Commercial in Confidence UWB-D00068 Rev J
Frequency Band Channel Bandwidth
4.9 - 5.0 GHz in TDD mode ¾ 2.5 MHz
¾ 5 MHz
¾ 10 MHz
5.15 - 5.35 GHz in TDD mode ¾ 2.5 MHz
¾ 5 MHz
¾ 10 MHz
5.47 - 5.725 GHz in TDD mode ¾ 2.5 MHz
¾ 5 MHz
¾ 10 MHz
5.725 - 5.875 GHz in TDD mode ¾ 2.5 MHz
¾ 5 MHz
¾ 10 MHz
5.85 - 5.95 GHz in TDD mode ¾ 2.5 MHz
¾ 5 MHz
¾ 10 MHz
* As long as the central channel is an even number
2.2 System Components
¾ Outdoor - Unit(s):
• MicroMAX Base Station Radio(s) (BSR)
• Global Positioning System (GPS)
¾ Indoor:
• SDA-4S Type II: small low cost IDU with built in LAN switch
• SDA-4SDC Type II: small low cost DC IDU with built in LAN Switch
• GPSD: optional Global Positioning System Distribution unit (for up to 4 BSRs)
• BSDU: optional Ethernet switch for implementing Base Stations consisting of multiple
BSRs
¾ IDU/ODU connectivity:
• CAT-5e cable 24 gauge or better (22 gauge recommended) for connecting to BSR
(SFTP - Shielded Foiled Twisted Pair - recommended)
• Fast Ethernet: 4 pins
• VDC power: BSR FDD/TDD requires 2 pins
• IDU/ODU length for BSR FDD: up to 100 meters
¾ Minimum configuration:
• SDA-4S and a single BSR
¾ Larger configurations:
• N*SDA-4Ss and N*BSRs