User Manual

MacroMAXe-4RX Installation Guide
Page 48 Commercial in Confidence UGD-D00181 Rev F2
7 Set Power System
Hazardous voltage! Before working, ensure that the power is removed from the
power connection cables. When the system is powered on, do not touch the
power terminals.
7.1 Power Input - DC
Each unit is provided with a 3/10/30 meter 48 volt power cable terminated with a male connector at
one end and a female connector at the other.
Table 19 - DC Power input
Connection
Color
Neutral
(Cold)
Blue
Live (Hot)
Brown
Caution: It is important that the power connector is attached at the correct end
(see illustration below) or damage to the connector/equipment will result.
Figure 29 – DC Power connector cable