User Manual

MacroMAXe-4RX Installation Guide
Page 42 Commercial in Confidence UGD-D00181 Rev F2
Figure 19 - Variable tilt antenna
Figure 20 - Antenna mounted on MacroMAXe
5.5 Antenna Connection
Caution: Antennas 1 & 2 Tx/Rx must be connected and attached before
MacroMAXe is powered on.
Caution: Power down MacroMAXe prior to disconnecting antenna.
The following describes the antenna connection:
Note: Some antennas are labeled 1, 2, 3, 4 and some are labeled „+‟, „–„, „+‟, „–„.