User Manual

MacroMAXe-4RX Installation Guide
Page 36 Commercial in Confidence UGD-D00181 Rev F2
The following diagram depicts the Wall Plate Details.
Figure 13 – Wall Mounted MacroMAXe Wall Plate Details
To mount the MacroMAXe in the wall mount configuration, perform the following steps:
1. Attach the Wall Plate to the wall at the height required to attach the MacroMAXe.
2. Fasten the Hangars to the rear side of the MacroMAXe enclosure, position the niched Hangar
so it is lower on the wall with the niche facing down.
3. Lift the enclosure and place the screws through the head clearance holes and position the
unit so that the top mounting holes retain the unit.