User Manual

MacroMAXe-4RX Installation Guide
Page 14 Commercial in Confidence UGD-D00181 Rev F2
Table 4 - 2.x GHz Antenna Types - Technical
Type
Frequency
range
Gain
Part number
60° Quad X-Polar
2.3-2.7 GHz
18.0 dBi
SEC60Q-2.X-RC-1
90° Quad X-Polar
2.3-2.7 GHz
17.0 dBi
SEC90Q-2.X-RC-1
Mounting kit for Quad X-Polar Antennas
MNT-KT-Quad-1
60° Dual Slant X-Polar
2.3-2.7 GHz
18.0 dBi
SEC60X-2.X-RC-1
90° Dual Slant X-Polar
2.3-2.7 GHz
17.0 dBi
SEC90X-2.X-RC-1
Mounting kit for Dual X-Polar Antennas
MNT-KT-Dual-1
Omni 10dBi Vertical External
2.3-2.49 GHz
10 dBi
ANT2300OV10-360
Table 5 - 3.x GHz Antenna Types - Technical
Type
Frequency
range
Gain
Part number
60° Quad X-Polar
3.3 - 3.8 GHz
18.0 dBi
SEC60Q-3.5-RC-1
90° Quad X-Polar
3.3 - 3.8 GHz
17.0 dBi
SEC90Q-3.5-RC-1
Mounting kit for Quad X-Polar Antennas
MNT-KT-Quad-1
60° Dual Slant X-Polar
3.3 - 3.8 GHz
18.0 dBi
SEC60X-3.5-RC-1
90° Dual Slant X-Polar
3.3-3.8 GHz
17.0 dBi
SEC90X-3.5-RC-1
Mounting kit for Dual X-Polar Antennas
MNT-KT-Dual-1
Omni Reg Compl Vertical Sector
3.3 – 3.5 GHz
10.0 dBi
OMNIV-3.4-RC-2
MacroMAXe Antenna Usage
MacroMAXe has four (4) RF ports that can be connected to either:
 A single four-port antenna
 Two two-port antennas
 Four single-port antennas
Note: Appropriate mounting kit for the dual and quad port antennas are
required (ordered separately).
Quad port cross polarized (X-Pol) antenna with four (4) ports – connected via 4 RF
jumper cables to MacroMAXe.
Dual slant cross polarized (X-Pol) antenna with two (2) ports - connected via 2 RF
jumper cables to MacroMAXe.
Omni antennas – for 360 degree coverage using a single MacroMAXe - requires an
Omni antenna for each receiver – 2 or 4 Omni antennas.
Note: The Omni antennas must be separated – with at least one meter
separation from each other (in 2.X and in 3.X GHz)