User's Manual

WiMAX CPE ─ Physical Connection Installation Guide
Document Version 1.0 Page 2 of 2
b) Find a suitable position to locate your CPE, and then install your CPE on a fixed pole.
c) Put the Ethernet cable through the waterproof joint. Install a crystal plug on the cable.
d) Plug Ethernet cable into your CPE and then plug the waterproof joint into it. Then plug
the waterproof joint into your CPE and turn the knob until it is tight.
e) Connect another end of the Ethernet cable to the PoE Adapter (⑥). Connect the PoE
Adapter to power source by Power cord (⑦).Connect the PoE Adapter to your computer
through an Ethernet cable.