User's Manual

PSP-D00120 Product Specification Airspan WiMAX MiMAX –Pro V-Series - System Release 9.0
Revision A4 Airspan Networks Inc. - CONFIDENTIAL Page 4 of 16
1 Product Overview
MiMAX-Pro is outdoor WiMAX customer premises equipment (CPE). The MiMAX-Pro, which is
used Sequans broadband interface, connects IP-enabled devices directly to WiMAX networks.
Designed for the residential and small enterprise markets, the device supports high-speed
broadband Internet through a Fast Ethernet connection. The MiMAX-Pro ensures high service
availability at enhanced ranges, operating in both LOS and NLOS propagation environments.
MiMAX-Pro is normally deployed with a built-in, integral antennas. Requiring professional
installation, the MiMAX-Pro is installed outdoors on a pole or wall, enabling optimal positioning for
best reception with the BS.
Designed for the residential, SOHO, and small to medium enterprise (SME) markets, the device
delivers over-the-air, high-speed broadband Internet from the Airspan WiMAX base stations to the
end-user. The MiMAX-Pro ensures high service availability at enhanced ranges, operating in both
LOS and NLOS propagation environments.
MiMAX-Pro is available in the following RF bands
1
:
• 2.3-2.4 GHz in TDD mode
• 2.5-2.69 GHz in TDD mode
• 3.3 – 3.6 GHz in TDD mode
• 3.6 – 3.8 GHz in TDD mode
MiMAX-Pro uses the OFDM signaling format, providing non line-of-sight (NLOS) performance.
MiMAX-Pro utilizes 64 QAM, 16 QAM and QPSK, modulation technologies by modulating
transmitted signals and demodulating the received signals where the original digital message can
be recovered. The use of adaptive modulation allows MiMAX-Pro to optimize throughput, yielding
higher throughputs while also covering long distances.
1.1 Main Features
 IEEE 802.16e-2005 Wave 2 compliance
 OFDMA modulation, 512, 1024 FFT points QPSK, 16QAM, 64QAM
 Output power:
38 dBm (EIRP)
 Antenna - Integrated Directional Dual Polarization
 Security
 802.16e PKMv2 key management
 X.509 digital certification for device authentication
 EAP-TLS & EAP-TTLS (MD5, MSCHAPv2) device and user authentication methods
 AES encryption
 TR-069 & OMA-DM for remote management
 WEB-based interface for local management
 MIMO Matrix A and B on DL
 DL MRC
1
Supported channel bandwidths detailed in 2.3