Product Specification: Airspan WiMAX MiMAX-Pro V-Series System Release 9.0 This specification details performance parameters and features supported by the specific product and Airspan system release as stated. It covers the standard configuration of MiMAX-Pro.
PSP-D00120 Product Specification Airspan WiMAX MiMAX –Pro V-Series - System Release 9.0 Revision History Revision Originator Date Description 0.1 Alex Tipograff 2008/8/5 Initial draft 0.2 Alex Tipograff 2008/8/11 Minor changes 0.3 Alex Tipograff 2008/8/19 document reference number added 0.4 Alex Tipograff 2008/9/17 MTBF values added 0.5 Alex Tipograff 2008/9/18 Dimensions and weight updated 0.6 Alex Tipograff 2008/11/14 N type connector for ext. ant.
PSP-D00120 Product Specification Airspan WiMAX MiMAX –Pro V-Series - System Release 9.0 Contents 1 PRODUCT OVERVIEW ............................................................................................................................. 4 1.1 1.2 1.3 2 AIR INTERFACE ........................................................................................................................................ 6 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3 ENVIRONMENTAL ..........................................
PSP-D00120 Product Specification Airspan WiMAX MiMAX –Pro V-Series - System Release 9.0 1 Product Overview MiMAX-Pro is outdoor WiMAX customer premises equipment (CPE). The MiMAX-Pro, which is used Sequans broadband interface, connects IP-enabled devices directly to WiMAX networks. Designed for the residential and small enterprise markets, the device supports high-speed broadband Internet through a Fast Ethernet connection.
PSP-D00120 Product Specification Airspan WiMAX MiMAX –Pro V-Series - System Release 9.0 1.2 Block Diagram MiMAX-Pro block diagram is shown below: Wimax antenna(s) 802.16e chipset manages PHY and MAC 802.16 Transceiver (1Tx/2Rx) PA 802.16 BB+ Lower MAC MII 1.3 Phy Data/PoE (RJ45) MiMAX Pro V-Series product view MiMAX-Pro picture is shown below: Revision A4 Airspan Networks Inc.
PSP-D00120 Product Specification Airspan WiMAX MiMAX –Pro V-Series - System Release 9.0 2 2.1 Air Interface Frequency of Operation & Duplex Methods Frequency 2.3 GHz 2.5 GHz 3.5 GHz 3.7 GHz Frequency Range 2300 to 2400 MHz 2496 to 2690 MHz 3300 to 3600 MHz 3600 to 3800MHz 2.2 Multiple Access Scheme Scalable OFDMA, as defined by IEEE802.16-2005 2.3 Channel Bandwidths 5 & 10Mhz for 2.3 GHz and 2.5 GHz, 3.5, 5 ,7 & 10Mhz for 3.5 and 3.7GHz. 2.
PSP-D00120 Product Specification Airspan WiMAX MiMAX –Pro V-Series - System Release 9.0 3 3.1 Equipment Capacity RF Channel Throughput RF Channel capacity is as per the IEEE802.16-2005 specification. MiMAX -Pro is half duplex. Revision A4 Airspan Networks Inc.
PSP-D00120 Product Specification Airspan WiMAX MiMAX –Pro V-Series - System Release 9.0 4 Radio Performance & Features 4.1 Standards Compliance MiMAX-Pro is compliant with IEEE 802.16-2005 Wave2 Standard 4.2 Link Budget The following RF Parameters contribute to the overall system link budget 4.2.1 Maximum Transmit Level (dBm) The following table details the Transmit (Tx) Power levels of MiMAX-Pro at the various modulations* Modulation FEC 2.3~2.4 GHz 2.5 & 2.7 GHz 3.3~3.6 GHz 3.6~3.
PSP-D00120 Product Specification Airspan WiMAX MiMAX –Pro V-Series - System Release 9.0 *Note: (1) Sensitivity levels measured while MiMAX-Pro operating in fixed modulation scheme as described in MRCT. 4.3 Dynamic Range MiMAX-Pro Transmit Power Control Range is 60 dB Revision A4 Airspan Networks Inc.
PSP-D00120 Product Specification Airspan WiMAX MiMAX –Pro V-Series - System Release 9.0 5 Software Features 5.1 Standards Compliance MiMAX-Pro is compliant to the following standards: • 5.2 IEEE 802.16e-2005 (802.16e) Convergence layer support MiMAX-Pro operates as NAT/NAPT or IP forwarder on IPCS. 5.2.1 • Convergence Sub-layer The MiMAX-Pro provides hardware support to perform classification based on Ethernet and IP convergence sub layers, as well as PHS and ROHC header compression.
PSP-D00120 Product Specification Airspan WiMAX MiMAX –Pro V-Series - System Release 9.0 5.3.2 • • • • • QoS MiMAX-Pro supports following scheduling services Best Effort (BE) Unsolicited Grant service (UGS) Real-Time Polling Service (RTPS) Non-Real-Time Polling Service (NRTPS) Extended Real-Time Polling Service (ERTPS) 5.4 Authentication & Security Following features are supported PKMv2 CMAC, security association EAP-TLS, EAP-TTLS(MD5, MS-CHAPv2) authentication X.
PSP-D00120 Product Specification Airspan WiMAX MiMAX –Pro V-Series - System Release 9.0 6 Physical & Powering 6.1 Dimensions Parameter Value Dimensions (height x width x depth) 205 X 205 X 55 mm Weight 1.2Kg 6.2 MiMAX-Pro Port Description Panel Interface Back 6.3 One 10/100BaseT Ethernet LAN & PoE Power Supply 6.3.1 Supply Voltage 48V PoE (Power Over Ethernet) 6.3.2 Power Consumption Mode Peak Revision A4 Power Consumption 12.9 W Airspan Networks Inc.
PSP-D00120 Product Specification Airspan WiMAX MiMAX –Pro V-Series - System Release 9.0 7 7.1 7.2 Environmental, Regulatory and Certification Environmental Operating Temperature -40° to +70°C Humidity 95% @ 40°C (non condensing) Regulatory The MiMAX-Pro V-Series are compliant with the following standards: FCC 47CFR Part 27 Subpart M(2.5~2.
PSP-D00120 Product Specification Airspan WiMAX MiMAX –Pro V-Series - System Release 9.0 8 Accessories 8.1 8.2 Antenna • Integrated Directional Dual Polarization antenna • Typical antenna gain: o 14 dBi @ 2.3 and 2.5 GHz o 15 dBi @ 3.3-3.6 GHz o 15 dBi @ 3.6-3.8 GHz PoE Adapter Dimensions: 68x50x25mm Input voltage 100 VAC – 240 VAC 50 Hz to 60 Hz Operating Temperature: -5°C to 50°C One RJ-45 Data cable out for PC& One RJ-45 female connector Data Out and 48V Power Out 8.
PSP-D00120 Product Specification Airspan WiMAX MiMAX –Pro V-Series - System Release 9.0 9 MTBF Product MiMAX PRO V- Series Revision A4 MTBF (Years) 28 Airspan Networks Inc.
PSP-D00120 Product Specification Airspan WiMAX MiMAX –Pro V-Series - System Release 9.0 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.