User Manual

WipLL System Description
6-6 of 6-12 Issue 03
4Mbit - Draft 05
1QDF10134AAP-SYD-FCC
Table 6-1: Radio and MAC Specifications
Parameter Value Comment
Operating frequency
Release 1.2
Release 1.4
2.4 GHz
2.4 GHz
Spectrum spreading method Frequency hopping CDMA Per ETSI EN300 328
Duplexing Method
Time Div. Duplex (TDD) 2.4GHz
Transmit Bit Rates Up to 4Mbps BER and distance dependent
Channel spacing at 1, 2 and
3Mb/s
Channel spacing at 4Mb/s
1MHz
2MHz
Will be configured at the
factory.
Output power from the radio
at 1, 2 and 3Mb/s
Output power from the radio
at 4Mb/s
Up to 19dBm
12dBm
Will be configured at the
factory.
Effective Isotropic Radiated
Power (EIRP) at 1, 2 and
3Mb/s
Effective Isotropic Radiated
Power (EIRP) at 4Mb/s
Up to 34dBm
27dBm
Depending on local
regulations maximum output
power can be set at factory
Modulation method 8 level CPFSK
Channel access method PPMA / Adaptive TDMA
Protocol efficiency Up to 80%
At BER = 10
-5
, depending on
the application
Table 6-2: Agency Certification
Parameter Value Comment
Emissions / Immunity
EN 300 339 EN 300 386-2 ETS
300 328
Safety EN/IEC 60950