User Manual

Chapter 3 - APPLICATIONS AND SERVICES
3-5 of 3-10 Issue 03
Draft 05
1QDF10134AAP-SYD-FCC
Figure 3-3 shows a typical backhauling of a base station using WipLL.
Figure 3-3: WipLL Backhauling
Remote base stations are typically required when the main base station sites cannot
cover an area due to lack of line-of-sight or when the distance exceeds the capability
of the radios to provide services.
It is recommended that a maximum of two hops be used between a main base station
and a subscriber site.
Note: Each such connection adds about 15 to 25ms delay to each packet.